Pia25967 Mav Test 64d14756bf141

NASA tests rocket motor design by Northrop Grumman for historic Mars Sample Return mission

Aug. 7, 2023
Discover how NASA's Mars Accent Vehicle (MAV) can withstand extreme temperatures with new cutting-edge technology, marking a milestone in planetary exploration

NASA tested a developmental rocket motor design from Northrop Grumman for NASA’s Mars Accent Vehicle (MAV), which will support the Mars Sample Return program. MAV will be the first rocket launch from the surface of another planet. It will also be the first mission to return samples from another planet, which are being collected by NASA’s Perseverance Rover, which landed on Mars in 2021. The tests included the first and second stage solid rocket motors needed for the return launch.

NASA is designing, building and testing MAV along with the project’s two primary contractors, Lockheed Martin Space and Northrop Grumman. Lockheed Martin Space is the overall system integrator and provides multiple subsystems, and Northrop Grumman provides the first stage and second stage main propulsion systems.

Managed at NASA’s Marshall Space Flight Center in Huntsville, Alabama, MAV is currently set to launch in June 2028, with the samples set to arrive on Earth in the early 2030s. The vehicle will travel aboard the Sample Retrieval Lander during launch from Earth, a two-year journey to Mars, and nearly a year of receiving samples collected by Perseverance.

After the Sample Transfer Arm on the lander loads the samples from Perseverance into a sample container in the nose of the rocket, the MAV will launch from Mars into orbit around the planet, releasing the sample container for the Earth Return Orbiter to capture.

The Mars Sample Return program is managed by NASA’s Jet Propulsion Laboratory in Southern California.

The MAV launch will be accomplished using two solid rocket motors—SRM1 and SRM2. SRM1 will propel MAV away from Mars’ surface, while SRM2 will spin MAV’s second stage to place the sample container in the correct Mars orbit, allowing the Earth Return Orbiter to find it.

To test the solid rocket motor designs, the MAV team prepared development motors. This allowed the team to see how the motors will perform and if any adjustments should be made before they are built for the mission. The SRM2 development motor was tested on March 29, 2023, at the Northrop Grumman facility in Elkton, Maryland. Then, SRM1’s development motor was tested on April 7 at Edwards Air Force Base in California.

SRM1’s test was conducted in a vacuum chamber that was cooled to minus 20°C (-4°F) and allowed the team to also test a supersonic splitline nozzle, part of SRM1’s thrust vector control system. Most gimballing solid rocket motor nozzles are designed in a way that can’t handle the extreme cold MAV will experience, so the Northrop Grumman team had to come up with something that could: a state-of-the-art trapped ball nozzle featuring a supersonic splitline.

“This test demonstrates our nation has the capacity to develop a launch vehicle that can successfully be lightweight enough to get to Mars and robust enough to put a set of samples into orbit to bring back to Earth,” said MAV Propulsion Manager Benjamin Davis at NASA’s Marshall Space Flight Center. “The hardware is telling us that our technology is ready to proceed with development.”

In fact, the supersonic splitline nozzle has achieved the sixth of nine technology readiness levels—known as TRL-6—developed by NASA. TRL-1 is the starting point at which there is just an idea for a new technology, while TRL-9 means the technology has been developed, tested and successfully used for an in-space mission.

Davis said the supersonic splitline nozzle achieved TRL-6 through vacuum bench testing and full-scale hot fire testing in April. Results are being independently evaluated and will be confirmed in August.

The supersonic splitline nozzle will also undergo qualification testing to make sure it can handle the intense shaking and vibration of launch, the near vacuum of space and the extreme heat and cold expected during MAV’s trip.

In addition to motor testing, the MAV team recently conducted its preliminary design review, which was a four-day, in-depth review of MAV’s overall design. Mars Ascent Vehicle Project Manager Stephen Gaddis said MAV passed that review, which means the team can now focus on continuing to improve MAV before its critical design review next summer.

Mars Sample Return will bring scientifically selected samples to Earth for study and is a strategic partnership with the European Space Agency (ESA) features. NASA said the samples currently being collected by Perseverance Rover during its exploration of an ancient river delta have the potential to reveal the early evolution of Mars, including the potential for ancient life.

Sponsored Recommendations

High Sensitivity Accelerometers to Monitor Traffic and Railroad Vibration for Semiconductor Manufacturing

This paper examines highly sensitive piezoelectric sensors for precise vibration measurement which is critical in semiconductor production to prevent quality and yield issues....

Simulation for Automation Guide

How digital twin solutions are expanding the capabilities of plant engineers.

Enhancing HMI Security and Accessibility with Cloud VPN Solutions

Enhance HMI security and remote access with Beijer’s cloud VPN solution. Enjoy advanced encryption, easy setup, and secure access via laptops, smartphones, or tablets. Cut costs...

Motor Encoders: What They Are and How They Work

Motor encoders are rotary encoders adapted to provide information about an electric motor shaft's speed and/or position. Like rotary encoders, motor encoders are most commonly...