The Status Display Touchscreen for G9SP programmable safety controllers is a plug-and-play touchscreen, displaying safety I/O error codes and enabling G9SP users to view the status of safety inputs and outputs without the cost of installing and wiring indicator lights. Users are able to reset up to four zones directly from the touchscreen. The touchscreen is easily integrated into existing G9SP applications or is available with the G9SP as a complete programmable safety control and monitoring solution kit. The status display touchscreen’s front panel is 96.0 x 96.0 x 7.0 mm, with an active display area of 58.5 x 58.5 mm. The display is LCD monotone, with 16 shades of gray. It is rated to provide in excess of 1,000,000 touchscreen operations and satisfies relevant IEC and EN standards. An EIP module enables programmable devices that follow ODVA guidelines for EtherNet/IP to communicate with G9SP controllers. These include Omron CJ and CS series PLCs, as well as Rockwell Automation CompactLogix and ControlLogix series programmable controllers.
