NACM Sees Improvement

July 13, 2009
The CMI data suggest that the economy finally reached its lowest point and has been in the recovery stage

The Credit Managers’ Index (CMI) again showed upward movement in May. It began to climb in February, and now has carried gains forward in four consecutive months, according to the National Assn. of Credit Management (www.nacm.org).

The latest CMI combined index rose from 44.3 to 45.4, which equals levels not seen since October 2008 when the overall economy began its major slide. “The recession essentially came to an end in February and March of 2009,” says Chris Kuehl, Ph.D., NACM economist. “The CMI data, combined with various other measures, suggest that the economy finally reached its lowest point and has been in the recovery stage since.”

Kuehl says this doesn’t mean the economy will come roaring back in the next few months but predicts the second quarter will be the last quarter of negative GDP as the third quarter should show some growth.

A great deal of regional and sector variation, which mirrors the performance of the U.S. economy as a whole, still exists. The states that have seen the highest rates of job loss and bankruptcy—California, Florida, Michigan and Ohio—are seeing the weakest performance in terms of credit. However, some states seeing severe declines—most notably Arizona and Nevada—have shown some improvement.

The manufacturing sector continues to improve slowly, according to NACM. The most improvement tended to show up in the reduction of unfavorable factors, as favorable indicators basically were unchanged from the previous month’s data. By most accounts the manufacturing sector is just now showing some positive movement, and it is possible that credit activity in the sector might have provided some advance warning.

In the months to come, more aggressive growth in the manufacturing sector will be likely as other data suggest that capital expenditures in the manufacturing arena are growing. And although the number of bankruptcies has increased over the past several months, the pace has slowed, according to NACM.

Sponsored Recommendations

Minimizing downtime with linear guide wheels in dirty environments

Is debris causing costly downtime and equipment failure? Learn how advanced self-cleaning guide wheel systems with solid lubrication can tackle debris, reduce wear, and keep operations...

2024 State of Technology Report: PLCs and PACs

Programmable logic controllers (PLCs) and programmable automation controllers (PACs) are the brains of the machine in many regards. They have evolved over the years.This new State...

High Sensitivity Accelerometers to Monitor Traffic and Railroad Vibration for Semiconductor Manufacturing

This paper examines highly sensitive piezoelectric sensors for precise vibration measurement which is critical in semiconductor production to prevent quality and yield issues....

Simulation for Automation Guide

How digital twin solutions are expanding the capabilities of plant engineers.