66842ad8cdcf282665f86800 2402cd Podcastcover

Advances in stepper motors to provide precise motion control

July 15, 2024
A Control Intelligence podcast with editor-in-chief Mike Bacidore, written by contributing editor Joey Stubbs

In this episode of Control Intelligence, written by contributing editor Joey Stubbs, editor-in-chief Mike Bacidore discusses what makes stepper motors more energy efficient and reliable.

Transcript

 
In factory automation systems, there are a variety of different motor technologies used for different applications, depending on the demands required of the motor, system costs or interaction with other motion system components, such as coordinated motion. The types of motors typically encountered in the factory include synchronous or induction AC motors, DC motors, both brushed and brushless, and permanent magnet motors. The stepper motor has been around for over a century, but has been gaining increased attention, new advancements and increased application in the last 10 years or so.
 
Stepper motors are crucial components in modern manufacturing and automation industries, offering precise control and reliability in a wide array of applications. Understanding how these motors function, their diverse uses and recent technological advancements provide insight into their pivotal role in manufacturing technology.
 
Stepper motors are synchronous motors with a high number of poles. At their core, they convert electrical pulses into precise mechanical movements. Unlike traditional electric motors that spin continuously when voltage is applied, stepper motors move in discrete steps. This characteristic makes them ideal for applications requiring precise positioning, such as robotics, 3D printers, CNC machines and automated assembly lines.
 
Control of stepper motors is achieved through a driver circuit that sequences the energization of the coils based on input pulses from a controller, often a microcontroller or PLC. The number of steps per revolution and the torque output depend on the motor's construction and the drive electronics' capabilities.
 
The advantages of stepper motors include high holding torque and very good positioning ability. By intelligently controlling the stator windings in full or micro-step mode, individual steps or partial steps can be driven to without position feedback. This distinguishes stepper motors from servo motors and makes them a cost-effective alternative. However, excessive acceleration and fast load cycles can result in the stepper motor no longer being able to follow the rotary field and "lose steps." The encoder option can improve matters in this situation.
 
Over the past 10 years or so, several advancements have significantly enhanced stepper motor technology, broadening their capabilities and applications beyond the first 90 years of their existence. Some of these advancements include:
 
The integration of stepper motors with advanced digital control systems, such as microcontrollers and field-programmable gate arrays, has improved their precision and reliability. Digital control allows for smoother motion profiles, less noise and more efficient current regulation, reducing heat generation and improving motor lifespan.
 
Advances in magnet and rotor design have led to stepper motors capable of delivering higher torque outputs in smaller form factors. This enhancement is particularly beneficial in applications requiring compact and powerful motors.
 
Traditionally, stepper motors operated in open-loop systems, relying solely on step commands without feedback on actual position. Recently, closed-loop control systems have become more prevalent, incorporating position feedback, usually through internal or external encoders, to correct for missed steps or external disturbances. This advancement significantly improves accuracy and reliability in demanding applications.
 
Efforts to improve energy efficiency have led to the development of stepper motors that operate at lower power consumption while maintaining high performance. This is critical in applications where minimizing energy use is a priority, such as battery-powered devices and green manufacturing initiatives.
 
Manufacturers now offer stepper motors with greater customization options, allowing engineers to select motors tailored to specific torque, speed and size requirements. Modular designs facilitate easier integration into diverse systems, accelerating development cycles and reducing time to market for new products.
 
Innovations in materials science and manufacturing processes have enabled the production of stepper motors with enhanced durability, heat dissipation capabilities and resistance to environmental factors such as moisture and dust. These improvements contribute to longer operational lifespans and reduced maintenance requirements.
 
Stepper motors continue to evolve as indispensable components in manufacturing and automation, driven by ongoing advancements in control technology, materials science and design innovation. Their ability to provide precise motion control makes them essential in applications ranging from industrial machinery to consumer electronics. Looking ahead, further improvements in efficiency, integration with digital control systems, and specialized applications are expected to increase their place as both foundational elements of modern automation solutions, and a complementary technology to servo systems. As industries continue to demand higher levels of performance and reliability at lower cost, complexity and power consumption, stepper motors will undoubtedly play a pivotal role in shaping the future of automated systems worldwide.

Sponsored Recommendations

High Sensitivity Accelerometers to Monitor Traffic and Railroad Vibration for Semiconductor Manufacturing

This paper examines highly sensitive piezoelectric sensors for precise vibration measurement which is critical in semiconductor production to prevent quality and yield issues....

Simulation for Automation Guide

How digital twin solutions are expanding the capabilities of plant engineers.

Enhancing HMI Security and Accessibility with Cloud VPN Solutions

Enhance HMI security and remote access with Beijer’s cloud VPN solution. Enjoy advanced encryption, easy setup, and secure access via laptops, smartphones, or tablets. Cut costs...

Motor Encoders: What They Are and How They Work

Motor encoders are rotary encoders adapted to provide information about an electric motor shaft's speed and/or position. Like rotary encoders, motor encoders are most commonly...