Novotechnik Programmable rotary sensors

The Vert-X 31E series of programmable rotary sensors are touchless magnetic angle sensors with a permanent magnet that can be secured to an application’s rotating shaft. There is no direct mechanical linkage between the shaft and the measuring system and therefore no wear. The sensors work through air or nonmagnetic materials with a gap between magnet and sensor. The maximum gap has been increased to 0.5-in between sensor and magnet. For mission-critical or safety applications, the sensors provide a flag by lowering the output signal to a specific level outside the normal electrical range in the rare case the magnet is damaged or the sensor’s magnetic actuator is outside the valid operating range.
Related To: 
May 22, 2017
1663369843829 Novotechnikvertx31e250

The Vert-X 31E series of programmable rotary sensors are touchless magnetic angle sensors with a permanent magnet that can be secured to an application’s rotating shaft. There is no direct mechanical linkage between the shaft and the measuring system and therefore no wear. The sensors work through air or nonmagnetic materials with a gap between magnet and sensor. The maximum gap has been increased to 0.5-in between sensor and magnet. For mission-critical or safety applications, the sensors provide a flag by lowering the output signal to a specific level outside the normal electrical range in the rare case the magnet is damaged or the sensor’s magnetic actuator is outside the valid operating range.

Request More Information

By clicking above, I agree to Endeavor Business Media's Terms of Service and consent to receive promotional communications from Endeavor, its affiliates, and partners per its Privacy Notice. I also understand my personal information will be shared with the sponsor of this content, who may contact me about their offerings per their privacy policy. I can unsubscribe anytime.